Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Beverly Hills, CA
Garage door installation in Beverly Hills is different from anywhere else in Southern California. The city’s Architectural Commission reviews most exterior changes, which means a new door isn’t just a functional purchase, it’s an aesthetic decision that has to clear a design review. Homes here run the full range from 1920s Spanish Colonial estates with original wood carriage doors to modern steel and glass rebuilds in the hills above Sunset. San Marcos Garage Door Service has served Beverly Hills since 2012, and we bring the same specialized approach to every job: repair first, replace only when the door has reached the end of its useful life. Call (877) 265-5166 for a free estimate.
Key Takeaways:
- Garage door installation in Beverly Hills typically runs $700 – $2200 depending on material and custom requirements.
- Many Beverly Hills neighborhoods have Architectural Commission review for exterior door changes; we help with specs and documentation.
- We service all eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
- Same-day repair is available for spring, cable, track, and opener issues in the 90210, 90211, 90212, and 90213 ZIP codes.
Why Beverly Hills Homes Are Different
Beverly Hills is a city of high-value, architecturally controlled homes where garage doors are often custom wood or steel carriage-house designs that must pass the city’s Architectural Commission review. That means installs and repairs require matching original profiles, sourcing specialty hardware, and working within strict aesthetic guidelines that few neighboring cities enforce. You can’t just swap a broken panel for whatever’s on the shelf. The replacement has to match the door’s design era, the home’s architectural style, and in many cases, the specific approval the original door received.
The housing stock ranges from 1920s and 1930s Spanish Colonial and Tudor estates to mid-century ranches and modern rebuilds. Many homes have oversized garages, three and four car setups with custom door systems that were never off-the-shelf. Original wood doors from the 1920s warp in the heat and need refinishing or complete rebuilds. Newer construction in the hills often uses high-end glass and aluminum doors with complex track and opener systems that require brand-specific programming. In the flats south of Santa Monica Boulevard, many garages are alley-loaded behind 1920s bungalows, where tight clearances and vintage single-car doors demand custom spring and track solutions. The dry, mild climate means less rust than the coast, but intense summer sun bakes wood doors and degrades finishes. Santa Ana winds push doors out of alignment and stress hinges and rollers. It’s a specific set of conditions, and garage doors are all we do.
Styles & brands we work with
Our Main Beverly Hills Services
Two services make up the bulk of what Beverly Hills homeowners call us for. Both are handled by the same specialized team, so you’re never bounced between departments.
Garage Door Repair in Beverly Hills
When a spring snaps in Beverly Hills, it’s usually on a door that’s heavier than average. Oversized three and four car garage doors put more load on every component, and the older wood doors in the flats have springs that were custom-sized decades ago. We stock replacement springs and cables for these systems, and we know how to match the original tension so the door balances correctly. A snapped spring is a genuine safety hazard, and we recommend leaving this repair to a trained professional rather than attempting it yourself. For full details on our repair service, see Garage Door Repair in Beverly Hills.
Garage Door Opener Repair in Beverly Hills
Beverly Hills homes often have openers integrated with smart-home platforms, and the electronics in those systems fail just like any other component. When a Chamberlain or LiftMaster opener stops responding to the wall console, the remote, or the app, the problem is usually in the logic board, the safety sensors, or the drive gear. We carry parts for all major brands on our trucks, so most opener repairs are completed in one visit. Opener repair is a distinct specialty for us, not an afterthought, and we service the electronics, drive systems, and safety sensors that big-box installers often miss. For more, see Garage Door Opener Repair in Beverly Hills.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Beverly Hills
Garage door installation in Beverly Hills runs $700 – $2200 for most residential projects, depending on material, size, and whether the door requires Architectural Commission review. Older homes in the flats and estates north of Santa Monica Boulevard often have non-standard rough openings that require custom fabrication or modification to fit a new door. The city’s dry climate means steel and aluminum doors hold up well, but wood doors need sealed finishes and periodic maintenance to survive the summer heat. Whether you’re replacing a warped original door on a 1928 Tudor or installing a modern glass/aluminum system on a new build in the hills, we handle the full installation from measure to final programming. Our installation team works across the full product range, so you can compare Clopay, Amarr, Wayne Dalton, and other brands side by side before making a decision. For a closer look at the service itself, see Garage Door Installation.
Garage Door Replacement
Signs you need it
Warped panels, cracked stiles, or a door that no longer sits square in its opening after adjustment are signs the door has reached the end of its service life.
What it costs in Beverly Hills
A full garage door replacement in Beverly Hills typically runs $700 – $2200, with custom wood and architectural-grade steel on the higher end.
How we do it
We measure the rough opening, document the existing door’s profile and hardware for Architectural Commission reference, remove the old door, install the new panels and track, and balance the springs to the door’s weight.
Garage Door Installation Service
Signs you need it
New construction, a garage conversion, or a door that’s been removed for renovation and needs a complete new system from the track up.
What it costs in Beverly Hills
Complete garage door installation service in Beverly Hills starts at $700 for a basic single steel door and runs to $2200 for oversized custom designs.
How we do it
We survey the site, confirm track clearances, install the track system and panels, set the springs, mount the opener, and program remotes and smart-home integration.
Garage Door Seal Installation
Signs you need it
Daylight visible under the door, water pooling on the garage floor after rain, or rodent and insect activity around the bottom edge.
What it costs in Beverly Hills
Garage door seal installation is typically included with new door installs, but as a standalone job it falls within the $150 – $600 general repair range depending on the seal type and door width.
How we do it
We remove the old bottom seal, clean the channel, cut the new seal to the exact door width, and slide it into place with the correct profile for your door brand.
What Garage Door Installation Costs in Beverly Hills
| Item | Typical range in Beverly Hills |
|---|---|
| New Door Installation (standard steel) | $700 – $2200 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
The single biggest driver of installation cost in Beverly Hills is custom sizing. Oversized garages, non-standard rough openings, and Architectural Commission requirements for matching original profiles all push a simple install toward the higher end. The second driver is material: wood and glass/aluminum doors cost significantly more than standard steel.
Do I need Architectural Commission approval for a new garage door in Beverly Hills?
Yes, in most cases. Beverly Hills requires exterior changes, including garage doors, to go through design review when the property is in an architecturally controlled zone. We provide spec sheets, material samples, and installation documentation to support your application, and we can coordinate the install timeline around approval.
Can you match my original 1920s door profile?
Yes. We work with manufacturers that produce reproduction carriage-house designs in wood and steel, and we can source period-appropriate hardware for Spanish Colonial and Tudor homes. The goal is a door that looks like it’s always been there.
Brands We Service in Beverly Hills
We work on your brand, whatever it is. Our technicians are factory-familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, which means we arrive already knowing the system on your wall. We stock common components for Chamberlain and LiftMaster openers, Genie drive systems, and Clopay and Amarr panel hardware locally, so most repairs don’t wait on parts. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Beverly Hills, CA
| Service | Typical range in Beverly Hills |
|---|---|
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2200 |
| General Garage Door Repair | $150 – $600 |
What pushes a Beverly Hills job toward the top of these ranges is usually door size and custom hardware. Oversized garages need longer springs and cables, and vintage wood doors often require custom-fabricated components rather than off-the-shelf parts. Every job gets a written quote before any work starts, and the price we agree on is the price you pay.
Neighborhoods We Serve in Beverly Hills
Our trucks cover all of Beverly Hills and the surrounding ZIP codes, from the flats south of Santa Monica Boulevard to the hills above Sunset. We know the difference between an alley-loaded 1920s bungalow garage and a four-car motor court in Trousdale Estates, and we dispatch accordingly. Typical response time across the city is same-day for most repair calls.
- The Flats (90211, 90212)
- Trousdale Estates
- Beverly Hills Gateway
- Beverlywood (adjacent, 90211)
- The Golden Triangle (90210)
Service Area – Cities Near Beverly Hills
Beyond Beverly Hills, we serve the surrounding communities with the same specialized garage door team. That includes Century City, CA with its high-rise residential garages, West Hollywood, CA where vintage condo buildings have tight underground parking, Culver City, CA with its mix of 1920s bungalows and new construction, and Hollywood, CA where hillside homes present unique track and clearance challenges.
Serving Beverly Hills, CA — Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Beverly Hills
Same-day service is available for most repair calls across all four Beverly Hills ZIP codes. Spring, cable, and opener repairs are prioritized because a door that won’t open is a real problem. Installation jobs are scheduled, typically within 3 to 5 business days of your call and your Architectural Commission approval if applicable.
We provide the technical documentation: spec sheets, material details, installation drawings, and product data for whatever door you choose. You’ll need to submit the application through the city’s design review process, but we can walk you through exactly what the Commission looks for in garage door replacement projects so your submission goes smoothly.
Yes. We don’t have a minimum job size. Roller replacement runs $110 – $220, and seal work falls within the general repair range. If the door is functional and the repair is small, we’ll tell you that. Repair first, replace only when it makes sense is how we operate.
Need a garage door company in Beverly Hills that knows the city’s homes, its review process, and its doors? Call San Marcos Garage Door Service at (877) 265-5166 for a free estimate. Garage doors are all we do.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Hills Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
— Karen Park"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
— Lisa Brooks"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
— Whitney Doyle