Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Fontana, CA
Garage door installation in Fontana means matching the right door to two very different housing eras: the aging single-car and two-car openings south of the 210 and the wide three-car insulated steel doors in the newer 92336 and 92337 subdivisions. San Marcos Garage Door Service has served Fontana since 2012, and we stock parts for both ends of that spectrum. If you need a new door measured and priced, call (877) 265-5166.
Why Fontana Homes Are Different
The garage work we do in Fontana splits along a north-south line that mirrors the city’s growth. In 92335 and the older streets near the former Kaiser steel mill site and historic downtown, we open doors on 1950s-70s ranch-style homes with original wood-and-steel doors that have weathered fifty or sixty Inland Empire summers. Those openings have usually racked and settled, so a door that looked square when it was hung no longer is. Techs on those jobs regularly find themselves re-squaring the frame before new track will roll straight.
Drive north into 92336 and 92337, toward the Etiwanda and Sierra crest area, and the houses change completely: 1990s-2000s production subdivisions with wide attached garages and insulated steel sectional doors. Those doors are heavier, the springs are bigger, and the failure mode is different, wear and cycles rather than age and rot. Fontana’s heat is the common thread. Extreme summer UV fades and chalks door finishes, and the dry air cracks rubber seals, weatherstripping, and nylon rollers years faster than coastal LA. Santa Ana wind events stress lightweight single-car doors hard enough to bend track on older unbraced openings. Any garage door company working here has to carry parts for both markets within a few miles of each other.
Styles & brands we work with
Our Main Fontana Services
Two services generate most of the calls we take from Fontana homeowners: broken doors that won’t move and openers that stopped responding. Here is what each one involves locally.
Garage Door Repair in Fontana
A door that won’t lift in Fontana is usually one of three things: a snapped torsion spring, a thrown cable, or track knocked out of line by wind. We diagnose on site, tell you the price before we touch anything, and carry the common spring and cable sizes for both the older southern-Fontana doors and the heavier northern subdivision doors on the truck. Full details on Garage Door Repair in Fontana.
Garage Door Opener Repair in Fontana
Opener failures in Fontana come in predictable flavors: fried circuit boards after summer brownouts, stripped gears on older chain-drive units, misaligned safety sensors, and remotes that lost their programming. We work on LiftMaster, Chamberlain, Genie, and the other major opener brands, so the technician arrives already knowing the system on your wall. Read more on Garage Door Opener Repair in Fontana.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Fontana
Garage Door Installation in Fontana is a different job depending on which side of the city you live on. In the older 92335 tracts near downtown, a “simple” replacement often turns into reframing a settled opening before new track will roll straight. In the newer 92336 and 92337 subdivisions, the job is usually a like-for-like swap of a wide insulated steel door, where the real decisions are insulation value, panel finish that will survive Fontana UV, and spring sizing for the heavier door. We measure, quote a written price, and order the exact door for your opening, no upsell, no guesswork. You can also see our full installation breakdown on the Garage Door Installation hub.
Garage Door Replacement
Signs you need it
Door panels are split, rusted through, or bowed badly enough that the door binds in the track, or the frame has pulled away from the wall and the door no longer seals.
What it costs in Fontana
New door installation in Fontana runs $700 – $2200 depending on size, panel material, insulation, and whether the old track and hardware can be reused.
How we do it
We measure the opening, confirm the frame is square (or reframe it if it isn’t), remove the old door and track, hang the new panels, and set the springs and opener brackets to spec.
Garage Door Seal Installation
Signs you need it
The rubber bottom seal is cracked, flattened, or leaving daylight under the door, and the side weatherstripping has hardened and pulled away from the jamb.
What it costs in Fontana
Seal and weatherstripping work in Fontana is part of a repair call, typically within the $150 – $600 garage door repair range depending on how many surfaces are replaced.
How we do it
We pull the old bottom seal, cut a new one to the exact door width, replace hardened side stops, and test that the door closes tight against the threshold.
What Garage Door Installation Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| New door installation | $700 – $2200 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
Can you install a door the same week I call in Fontana?
Usually, yes. We measure and quote first, then order the door. Most Fontana installations are scheduled within the same week, but we never promise same-day installation because the door has to be ordered to your exact opening size.
Will you match my existing door’s color and style?
We match color and panel style as closely as the manufacturer allows. On Clopay and Amarr doors we can usually match a standard color, but a sun-faded door from the 1990s won’t match any new panel exactly, so expect to repaint or replace all panels if a perfect match matters.
Brands We Service in Fontana
We work on Chamberlain and Genie openers, Clopay and Amarr doors, and the other major brands we carry. Common springs, cables, rollers, opener gears, and safety sensors are stocked for the door and opener combos we see most across Fontana, which means most repairs leave the truck finished on the first visit rather than waiting on a part. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
| Garage door repair (general) | $150 – $600 |
Two things push Fontana prices toward the top of those ranges: older 92335 openings that need reframing before new parts will fit, and heavier insulated doors in the northern subdivisions that require upgraded springs and cables. Whatever the job, we quote the price before any work starts, and the number you agree to is the number you pay.
Neighborhoods We Serve in Fontana
We cover the full city from the older downtown tracts to the Etiwanda and Sierra crest subdivisions, plus the adjacent unincorporated pockets that use Fontana addresses. Our typical response time anywhere in Fontana is same day for repairs and emergency calls, half a day in the busy summer months.
- Downtown and the old mill district (92335)
- South Fontana and the 92337 corridor
- Northern Fontana, Etiwanda and Sierra crest area (92336, 92337)
- Summit Heights and the Sierra Lakes area
- The unincorporated pockets south of the 210 using 92331
Service Area – Cities Near Fontana
We also cover the neighboring communities around Fontana. Homeowners in Bloomington, CA and Rialto, CA call us for the same spring and opener repairs, and we work regularly in Glen Avon, CA and Pedley, CA on the older stock doors common along the Jurupa corridor.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Fontana
Same day in almost every case. We keep Fontana on our daily route, so a broken spring call in the morning is usually fixed by early afternoon, and we carry the common sizes for both the older southern-Fontana doors and the heavier northern subdivision doors.
For a like-for-like replacement on an existing opening, no. If the opening itself is being widened or the frame is being rebuilt, Fontana may require a building permit. We can tell you during the measure which category your job falls into.
Yes. We work in HOA-governed subdivisions across 92336 and 92337, and we’re familiar with the common requirements: approved door styles, specific panel colors, and matching hardware. If your HOA has a pre-approved list, we’ll install within it, and we can often tell you right away whether a door you like will pass review.
Need a door fixed, replaced, or installed in Fontana? Call San Marcos Garage Door Service at (877) 265-5166 for a free estimate, and we’ll quote the exact price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
— Karen Park"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
— Lisa Brooks"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
— Whitney Doyle