Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Century City, CA
Garage door installation in Century City means working inside concrete parking podiums, not driveways. We’re San Marcos Garage Door Service, a single-trade garage door specialist serving the towers, retail plazas, and condo buildings of ZIP 90067 since 2012. From roll-up steel doors on loading docks to fire-rated shutters over parking entries, we handle the commercial and light-industrial door systems this district actually runs on. Call (877) 265-5166 for a free estimate on any door or opener project in Century City.
Why Century City Homes Are Different
Century City isn’t a residential neighborhood in the traditional sense. The former 20th Century Fox backlot became a dense vertical business district, and nearly every structure here sits atop multi-level podium parking. When a garage door fails in Century City, the call usually comes from a property manager at an office tower on Avenue of the Stars, a facilities engineer at Westfield Century City, or a board member at a condo building off Constellation Boulevard.
That changes the work in specific ways. Clearance heights in these parking decks run tight, often under 8 feet, so commercial rolling doors and sectional steel doors need low-headroom track packages. Fire-rated corridor separation means door openings near stairwells and elevator banks require fire-door assemblies with automatic closing systems and LA Fire Department recall compliance. We deal with those requirements on almost every Century City job.
The climate matters too. Coastal marine air off Santa Monica Bay carries salt that oxidizes steel roll-up door slats and gate operator housings faster than inland. Meanwhile, Santa Ana wind events in fall push fine dust into door tracks and operator chain rails. Buildings in Century City see more track re-alignment and operator cleaning than comparable structures in Beverly Hills or West Hollywood simply because of wind-driven grit and salt exposure.
Styles & brands we work with
Our Main Century City Services
Most calls we take in Century City fall into two buckets: mechanical failures on existing doors, and opener systems that stopped responding. Both live on their own dedicated pages, and here’s what each covers in this part of Los Angeles.
Garage Door Repair in Century City
Broken springs, snapped cables, bent tracks, worn rollers: these are the failures that strand vehicles inside parking podiums or leave a loading dock unable to open for deliveries. In Century City, repair work often happens on commercial roll-up doors in tight machinery rooms or on fire-rated sectional doors where the opening serves as an egress path during an alarm. We arrive with springs, cables, rollers, and track hardware sized for the actual door on site, and building managers typically need the door operational before the parking deck hits its evening peak. Read the full breakdown on our Garage Door Repair in Century City page.
Garage Door Opener Repair in Century City
When a parking gate operator or roll-up door opener fails in Century City, it isn’t a convenience problem; it’s an access problem for every tenant in the building. We service LiftMaster and Chamberlain commercial operators, Genie systems, and safety sensor arrays that tie into building fire-alarm and access-control systems. Our techs carry control boards, limit switches, remotes, and photo-eye sensors so most opener repairs finish in a single visit. See the full scope on our Garage Door Opener Repair in Century City page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Century City
Garage door installation in Century City is almost never a homeowner picking a carriage-style door for a suburban two-car garage. It’s a property manager replacing a 30-year-old roll-up door on a freight dock, or a condo board swapping a dented sectional steel door inside a below-grade parking podium where every inch of headroom counts. Salt air and Santa Ana grit shorten door life here, and tight podium clearances mean the door has to fit the opening exactly the first time. That’s the work we do. For the full range of what our installation team handles, see our Garage Door Installation hub.
Garage Door Replacement
Signs you need it
Door panels are dented or rusted through, the door binds mid-cycle repeatedly, or a property inspector flags fire-rating non-compliance on an aging opening.
What it costs in Century City
A full replacement in Century City typically runs $700 – $2200 depending on door size, steel gauge, and whether fire-rated construction is required.
How we do it
We measure the opening in person, verify fire-door requirements with building records if applicable, remove the old door and hardware, install the new door with matched track and springs, and test the full cycle including safety sensors and egress functions.
Commercial Garage Door Installation
Signs you need it
New tenant fit-out requires a roll-up door for a loading dock, a retail storefront needs a security shutter, or a parking entrance needs a code-compliant gate door.
What it costs in Century City
Commercial installations in Century City start at $700 and scale to $2200 for large roll-up steel doors with operators, depending on opening size and fire-rating requirements.
How we do it
We coordinate with the building’s facilities team on scheduling and fire-alarm integration, install the door or shutter with proper steel gauge for the opening, mount the operator and safety sensors, and run full open-close and egress tests before sign-off.
Garage Door Seal Installation
Signs you need it
Daylight is visible under the door, dust from Santa Ana winds blows into the garage interior, or water pools inside the threshold during rain.
What it costs in Century City
Seal installation runs $110 – $220 in Century City, keeping dust and rain out of parking-podium entries and loading areas.
How we do it
We remove the old bottom seal and retainer, clean the door bottom, install the new seal matched to your door’s profile, and confirm a flush contact with the floor across the full width.
What Garage Door Installation Costs in Century City
| Item | Typical range in Century City |
|---|---|
| New door installation | $700 – $2200 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
How long does a garage door installation take in Century City?
Most replacement doors take one full day on site. Commercial roll-up doors with operator integration can take two days when fire-alarm tie-ins and building security coordination are involved. We give a firm schedule before work starts.
Will our building need a permit for a new garage door in Century City?
That depends on the building classification and whether the opening is fire-rated. Condo and office buildings in Century City often require LA Department of Building and Safety review before a door swap, especially on egress paths. We coordinate with your property manager on documentation. Call (877) 265-5166 to discuss your specific opening.
Brands We Service in Century City
We service doors and openers from Chamberlain, Genie, Clopay, and Amarr, among others. Our trucks carry springs, rollers, sensors, and operator boards sized for these systems, so Century City jobs don’t wait on parts shipments. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Century City, CA
| Service | Typical range in Century City |
|---|---|
| Garage door repair | $150 – $600 |
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
In Century City, fire-rated door requirements and tight podium clearances are the two factors that push a job toward the upper end of these ranges. Low-headroom track packages and fire-door assemblies cost more than standard residential hardware, and buildings with freight-elevator access requirements add time to the install. Whatever the job, we quote the full price and get your approval before any work starts, and that number doesn’t change once we begin.
Neighborhoods We Serve in Century City
We cover all of ZIP 90067, focused on the buildings and plazas in and around the district’s core. Typical response time in Century City is under two hours for repair calls during business hours.
- Avenue of the Stars corridor
- Century Plaza area
- Westfield Century City
- Constellation Boulevard buildings
- Century Park East and West towers
Service Area – Cities Near Century City
San Marcos Garage Door Service handles doors across the greater Los Angeles area. If your building is just outside Century City, we also serve Beverly Hills, CA, Culver City, CA, West Hollywood, CA, and Santa Monica, CA.
Serving Century City, CA — Our Local Coverage Area
We’re based in the Century City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Century City
Most repair calls in Century City get a technician on site within two hours during business hours. Parking-podium and loading-dock doors that block tenant access or deliveries get priority dispatch. Call (877) 265-5166 and we’ll give you a realistic arrival window before you hang up.
Yes. Most Century City jobs require coordination with building security for access to parking decks, freight elevators, or loading areas. Our technicians are used to checking in with front desks, signing contractor logs, and scheduling work around tenant traffic peaks. We’ll handle the building’s access requirements directly.
No. We quote the full job price before work begins and confirm that number with you on site. If we find additional damage during the repair, we show you what we found and get your approval on any added cost before proceeding. You’ll never get an invoice bigger than the agreed quote.
For garage door installation, repair, or opener service in Century City, call San Marcos Garage Door Service at (877) 265-5166 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Century City Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
— Nisha Singh"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
— Angela Lin"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
— Karen Park